Konica Minolta Magicolor 2550DN - Manual (Page 179)

Configuring the Printer 163
Network Page
The Network page allows you to configure network settings. For more infor-
mation on these protocols, see chapter 7, “Network Printing”.
Ethernet
TCP/IP (shown above)
The Network - Ethernet - TCP/IP window provides the following parameters
for configuration:
Item Description
Enable TCP/IP If TCP/IP is disabled you will not be able to access
web pages or any other options through TCP/IP port.
To enable TCP/IP you will have to enable it from Con-
figuration Menu on the printer.
Default: [Checked]
Configuration Menu Equivalent:
MENU INTERFACE MENU -
ETHERNET - TCPIP - ENABLE
mc2550_RG_E.book Page 163 Wednesday, March 29, 2006 6:29 PM