Konica Minolta Magicolor 2550DN - Manual (Page 103)

Ethernet Menu 87
Using the Ethernet Menu Options
If the printer is connected to a network, the following settings should be spec-
ified. For details about each setting, contact your network administrator.
"
When manually setting the IP address, Subnet Mask, and Gateway
turn off DHCP first.
TCP/IP
Enable
DHCP/BOOTP
IP Address
Purpose Enables or disables TCP/IP.
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
Options YES
NO
Default YES
Purpose If there is a DHCP or BOOTP server on the network, speci-
fies whether the IP address and other network information
is automatically assigned by the DHCP or BOOTP server.
Options YES
NO
Default YES
Purpose Sets the IP address of this printer on the network.
Range 0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default 192.168.001.002
mc2550_RG_E.book Page 87 Wednesday, March 29, 2006 6:29 PM