Konica Minolta Magicolor 2550DN - Manual (Page 145)

Configuring the Printer 129
Color Mode Sets the mode to use color or monochrome output.
Choices: Color, Grayscale
Default: Color
Configuration Menu Equivalent:
MENU SYSTEM DEFAULT - COLOR
MODE
Toner Out Action Determines if the printer continues accepting jobs
sent to it when a low toner condition occurs.
Choices: Stop, Continue
Default: Stop
Configuration Menu Equivalent:
MENU QUALITY MENU - TONER
OUT ACTION
Density Control Adjusts toner (color) density of each color (cyan,
magenta, yellow, and black). The higher the value,
the higher the density of the color.
Range: 1 - 5
Default: 3
Configuration Menu Equivalent:
MENU QUALITY MENU - DENSITY
CONTROL
Submit button Saves and applies any changes made.
Reset button If you made changes to any of the parameter set-
tings but don’t wish to apply the changes, selecting
this button restores the last submitted parameter
settings.
Save Custom button Saves the Current values of the parameters as the
Custom settings. Using the Restore Custom but-
ton, you can change the parameter settings back to
the Custom settings after changes are made.
Restore Custom
button Changes all settings to the Custom values.
Restore Factory
button Changes all settings to the Factory values.
Item Description
mc2550_RG_E.book Page 129 Wednesday, March 29, 2006 6:29 PM