Konica Minolta Magicolor 2550DN - Manual (Page 116)

Network Connection 100
Setting the Address Manually
You may also manually change the printer’s IP address, subnet mask, and
gateway by using the following instructions. (See chapter 5, “Understanding
the Ethernet Configuration Menus” for more information.)
"
When the IP address is changed, add a new port or reinstall the
printer driver.
CAUTION
You should always notify your network’s administrator before changing
the printer’s IP address.
1
Turn on your PC and printer.
2
When the printer’s message window displays IDLE , set the IP address.
Press this
key . . . (until) the message window reads . . .
IDLE
MENU
PROOF/PRINT
or if no optional hard disk is installed:
MENU
PRINT MENU
MENU
INTERFACE MENU
TCP/IP
IP ADDRESS
mc2550_RG_E.book Page 100 Wednesday, March 29, 2006 6:29 PM