Konica Minolta Magicolor 2550DN - Manual (Page 170)

Configuring the Printer 154
Auto-Sense Default When Auto is selected as the Default Emulation
(see above), the printer samples the incoming print
job to try to determine the correct emulation to use
for the job. If the printer is unable to discern the
emulation of an incoming print job, the setting for
this parameter is used as the emulation.
Choices: PCL5, Postscript
Default: PCL5
Configuration Menu Equivalent:
MENU SYSTEM DEFAULT -
EMULATIONS - AUTO DEFAULT
Submit button Saves and applies any changes made.
Reset button If you made changes to any of the parameter set-
tings but don’t wish to apply the changes, selecting
this button restores the last submitted parameter
settings.
Save Custom button Saves the Current values of the parameters as the
Custom settings. Using the Restore Custom but-
ton, you can change the parameter settings back to
the Custom settings after changes are made.
Restore Custom button Changes all settings to the Custom values.
Restore Factory button Changes all settings to the Factory values.
Item Description
mc2550_RG_E.book Page 154 Wednesday, March 29, 2006 6:29 PM