Konica Minolta bizhub 750 - Manual (Page 95)

Setting Up Network Printing 3
IC-202 3-21
5
In Administrator mode of PageScope Web Connection, select [Net-
Ware Setting] from the Network tab, and then specify the following set-
tings.
IPX Setting: Select [ON].
Ethernet Frame Type: Select [Auto Detect]. (Select the frame type ac-
cording to the network environment.)
NetWare Print Mode: Select [Nprinter/Rprinter].
Print Server Name: Specify the print server name created in step 4.
Printer Number: Specify the printer number (0-255). When 255 is spec-
ified, the setting is [Auto Detect].
6
Restart this machine (turn the main power off, then on again).
– When turning the power off, then on again, be sure to turn the sub-
power switch off first, then the main power switch. In addition, wait
at least 10 seconds before turning the power on again; otherwise,
this machine may not function properly.
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that “bizhub 750/600” (created printer) is shown as “Wait-
ing for Job” for the connected printer (0).