Konica Minolta bizhub 750 - Manual (Page 32)

Overview 1
IC-202 1-10
NetBEUI, AppleTalk (EtherTalk) and Bonjour/Rendezvous protocols.
Parallel Interface (optional : EK-701)
Connect when using this printing system as a local printer.
A computer running Windows and an IEEE 1284 parallel cable are required
for connection. Use a parallel cable that uses a terminal with an Amphenol
36-pin male connector.
The parallel interface supports the compatible, nibble, and ECP modes.
USB Interface (optional : EK-701)
Connect when using this printing system as a network printer.
The USB interface can be connected to a computer running Windows or to
a Macintosh computer. A USB cable is required for connection. Use a type
A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable measuring 3
meters or less is recommended.
The Ethernet, parallel and USB interfaces can be used simultaneously.