Konica Minolta bizhub 750 - Manual (Page 176)

Setting Up the PCL Driver 5
IC-202 5-41
5.7 Specifying the Quality Tab Settings
Pattern
Represents the image with black and white dots at varying density. Selecting
[Fine] increases the dot density. Default is [Coarse].
1
Click the Quality tab.
2
Click the [Fine] in [Pattern].
Print Density
By selecting the [Toner Save] or [Draft Print] check box, toner consumption
is saved or prints become lighter.
0 The [Toner Save] and [Draft Print] boxes in [Print Density] cannot be used
at the same time.
1
Click the Quality tab.
2
To save the toner consumption, select the [Toner Save] check box.
3
For lighter or draft printing, select the [Draft Print] check box.