Konica Minolta bizhub 750 - Manual (Page 300)

Various Settings 10
IC-202 10-6
Spool Setting
You can set whether or not a spool is used. (Default setting: ON)
1
On the Utility Setting screen, touch [6 Printer Setting].
– For details on displaying the Utility Setting screen, refer to “To dis-
play the Utility Setting screen” on page 10-1.
2
Touch [1 Basic Setting].
3
Touch [Spool Print Jobs in HDD before RIP].
4
Touch the button for the desired setting.
– ON: When the next job is received while processing a job, the print
data is stored in the HDD.
OFF: The print data is not stored in the HDD.
2
Note
Be sure not to change the setting to [OFF]. Printing may not be possible.