Konica Minolta bizhub 750 - Manual (Page 145)

Setting Up the PCL Driver 5
IC-202 5-10
To Use Transparency Interleave
When printing on Transparency paper, you can set to insert blank paper for
printing.
1
Click the Setup tab.
2
Set the [Paper Source] to “Bypass Tray”.
– “Transparency Interleave” cannot be set if [Paper Source] is set to
“Auto”. Be sure to set it to “Bypass Tray”.
3
Click the [Paper Type Settings] and select “Bypass Tray”
4
Click the [Edit Paper Type] and then select “Transparency”.