Konica Minolta bizhub 750 - Manual (Page 150)

Setting Up the PCL Driver 5
IC-202 5-15
Stapling
Multiple-page documents can be stapled.
The staple function is available only when the optional finisher (excepting SF-
601) is installed.
1
Click the Setup tab.
2
Select the [Staple] check box.
3
From the drop-down list, specify the number of staples and the sta-
pling position.
2
Note
Depending on the selected Binding Position setting, different stapling po-
sitions are available.
Number of sheets which can be stapled is 100 of FS-505 and 50 of FS-
504/602 on A4 or smaller plain paper.
Hole Punching
Holes can be punched into the printed document.
The hole punch function is available only when optional finisher (excepting
SF-601) is installed. In addition, the Punch kit or Punch Z-Fold Unit should
have been installed.
1
Click the Setup tab.
2
Select the [Hole-Punch] check box.
3
From the drop-down list, specify the number of punched holes.