Konica Minolta bizhub 750 - Manual (Page 235)

Setting Up the KONICA MINOLTA PS Driver (Windows) 6
IC-202 6-39
Bitmap Compression
Set whether or not to use the Bitmap compression. Using this function when
much image data should be printed, the printing speed may be improved.
1
Click the PostScript tab.
2
Select [RLE], [LZW] or [JPEG] from the [Compress Bitmap] pull down
list in the setting.
– If you select [JPEG], then you can select the JPEG compression
type from the [JPEG] pull down list.
Using Tokenised PS
Set whether or not to use Tokenised PS.
1
Click the PostScript tab.
2
If you use the Tokenised PS, select the [Tokenised PS] checkbox in the
setting.
Setting the Output Protocol
Set the output protocol as follows.
1
Click the PostScript tab.
2
Select [Pure Binary] or [ASCII] from the [Output Protocol] pull down list
in the setting.
Setting the Gamma
Set the gamma correction value as follows.
1
Click the PostScript tab.
2
Set the gamma correction value from the [Gamma Level] pull down list
in the setting.
– Setting range is 0.000 - 2.000.