Konica Minolta bizhub 750 - Manual (Page 260)

Setting Up the PPD Driver (Windows) 7
IC-202 7-6
7.4 Advanced
You can set the functions of the finisher, print density adjustment and other
advanced function in the Advanced window.
Specifying Settings
0 This function can be used only when the optional unit has been set in the
Device Settings tab (page 7-8). Be sure to set the options if they have
been installed.
0 When selecting a function, a yellow exclamation mark ( ) appears.
0 Following causes can be considered:
any required optional function has not been set, or
any function which cannot be used together with other ones has been al-
ready set.
1
Click [Advanced] in the Layout tab or Paper/Quality tab.
2
Select the function in the drop down list on the right side of each item.