Konica Minolta bizhub 750 - Manual (Page 105)

Setting Up Network Printing 3
IC-202 3-31
For Mac OS 9
1
On the Apple menu, point to [Control Panel], and then click [AppleTalk].
2
From the [Connect via] drop-down list, select [Ethernet].
3
On the Apple menu, point to [Control Panel], and then click [TCP/IP].
4
From the [Connect via] drop-down list, select [Ethernet].
5
Select the items from [Configure] that correspond to the network set-
tings for the Macintosh computer that is connected to the network, and
then set the IP address and subnet mask.
6
Click the close button at the top left of the dialog box.
The “Save changes to the current configuration?” message appears.
7
Click the [Save].