Konica Minolta bizhub PRO 1050P - Manual (Page 51)

Post Processing
The Post Processing panel allows you to select printing operations performed
after the job has been rendered on the bizhub PRO 1050.
You can set the following attributes:
1. Date/Time – inserts a date time stamp on each printed page.
The date/time stamp may be applied to Front cover only, or to
All pages.
2. Page Numbering – inserts a page number on each printed page.
The page number can be printed on All Pages, Not on Front
Cover, or Not on any Cover.
Start Page selects the first page on which a page number is
printed. Starting Number sets the number printed on this page.
3. Set Numbering – inserts a set number on each printed set (copy).
The set number can be applied by the functions Stamp all Pages,
Stamp first Page, or as Watermark. Stamp all Pages and Stamp
first Page print the set number once per page. Watermark prints the
number in light gray many times per page and on all pages.
Starting Number determines the number printed on the first set.
Each of the above operations is applied after imposition, i.e. the page containing
the date/time stamp, page number, or set number may consist of two original
document pages.
The text position and font settings for the above operations can be configured at
the panel of your bizhub PRO 1050.
Konica Minolta bizhub PRO 1050 Printer Driver Windows Printing
• 51