Konica Minolta bizhub PRO 1050P - Manual (Page 13)

Click Gather Option Information to let the printer driver plug-in auto-detect
the installable options.
You may also change an option value manually. This can be used, e.g. to create
jobs as PostScript files for a bizhub PRO 1050 which is not currently connected
to your PC and may have different options installed.
Click OK twice to confirm your changes.
After you have enabled the available installable options, the features
corresponding to those options will be available in the printer driver.
Normalize PostScript may be enabled if you need to use certain plug-in
features, e.g. tray selection per page, with applications like Adobe PageMaker
which have their own PostScript driver based only on a PPD.
Note: Normalize PostScript should be used with caution as it may change the
output of objects like outline fonts or embedded EPS files. If you want to use the
driver with Normalize PostScript enabled for PageMaker, and with Normalize
PostScript disabled for other applications, you may install the driver twice and
enable Normalize PostScript only in one of the printers.
Note: If the bizhub PRO 1050 is used as a shared printer on a network server
(and not directly), the printer driver plug-in will not be able to configure
installable options automatically. In this case, set the installable options
manually.
Note: Do not use Device Settings » Form to Tray Assignment in the printer
properties dialog to perform tray selection. Using different settings than the
default may cause unexpected results.
Konica Minolta bizhub PRO 1050 Printer Driver Windows Installation
• 13