Konica Minolta bizhub PRO 1050P - Manual (Page 22)

Print Properties
To select more print options within the Print dialog, click the Properties (or
Preferences) button.
The Properties dialog (Layout and Paper/Quality tab sheets and Advanced
dialog) allows you to select the following options:
• Paper size – the paper size selected here corresponds to the
document page size selected in the page setup dialog.
• Orientation – the orientation selected here corresponds to the
document orientation selected in the page setup dialog.
The orientation “landscape rotated” means that the pages are
rotated by 180
°. This may be relevant if finishing options are
applied, or if the document contains mixed paper sizes.
• Pages per sheet – allows to print n-up (up to 16 pages per sheet)
using the core printer driver.
Further imposition options are available in the printer driver plug-in.
• Paper source – selects the tray to be used for printing.
Autoselect means the selection is performed in the engine, based on
output paper size, orientation, and finishing requirements.
See sections “Paper” and “Trays” for details on paper and tray
selection.
• Page order – selects front to back or back to front printing.
Reordering is applied to document pages, i.e., pages are reversed
before imposition (booklet etc.) is performed. See also “Face up” in
section “Layout”.
22
• Windows Printing
Konica Minolta bizhub PRO 1050 Printer Driver