Konica Minolta bizhub 161f - Manual (Page 90)

4.1 Making a Basic Copy 4
bizhub 161f 4-3
Ma
ki
ng Copi
es
Ch
apte
r 4
4 Specify the image density.
❍ “Adjusting the Image Density”
on page 4-12
5 Using the 10-Key Pad, enter the
number of copies to be made. Any
number from 1 to 99 can be
entered.
6 Press the [Start] key.
This will start the print cycle.
❍ To stop the print cycle in mid-
operation, press the [Stop]
key.
❍ To cancel the print job, press
the [No/C] key or the [Panel
Reset] key.
❍ To restart the print cycle, press
the [Start] key.