1 utility mode, Utility mode -2, Us in g th e uti lit y mod e chap ter 7 – Konica Minolta bizhub 161f User Manual
Page 149
7
7.1 Utility Mode
7-2
bizhub 161f
Us
in
g th
e Uti
lit
y
Mod
e
Chap
ter
7
7.1
Utility Mode
There are fifteen menus in the Utility mode.
No.
Name
Description
1
MACHINE SETTING
Used to specify settings for the machine’s operating environment.
2
PAPER SOURCE
SETUP
Used to specify the size and type of paper loaded in Tray1. In addition,
auto tray switching can be enabled for each tray.
3
USER MANAGEMENT
Used to specify settings after the drum cartridge is replaced.
4
ADMIN.MANAGEMENT
Used to specify setting for the administrator.
5
COPY SETTING
Used to specify the default settings for each copy function.
6
FAX REGISTRATION
Used to specify the default setting for each fax function.
7
TX OPERATION
Used to specify the default setting for TX operation.
8
RX OPERATION
Used to specify the default setting for RX operation.
9
COMM. SETTING
Used to specify the default setting for communicating environment.
10
REPORTING
Used to specify the default setting for each report function.
11
INITIAL USER DATA
Used to specify setting for the initializing user data.
12
NETWORK SETTING
Available only if the optional Network Interface Card NC-501 is
installed. For details, refer to the User’s Guide for the Network
Interface Card NC-501.
13
E-MAIL SETTING 1
Available only if the optional Scanner Unit SU-502 is installed. For
details, refer to the User’s Guide for the Scanner Unit SU-502.
14
E-MAIL SETTING 2
15
SCAN SETTING