Konica Minolta bizhub 161f - Manual (Page 134)

6.1 Transmission Methods 6
bizhub 161f 6-15
F
a
x
T
rans
mi
ss
io
n/Re
ce
pti
on M
e
th
ods
Ch
apt
er
6
5 Specify the relay station, and then
press the [Yes] key.
❍ Refer to “Dialing” on page 5-2 .
A screen appears, allowing you to
specify the relay box ID.
6 Using the 10-Key Pad, enter the
relay box ID.
❍ Enter the relay box ID (20
digits or less) programmed at
the relay station.
❍ If you wish to correct the ID, press the [No/C] key, and then enter the new
number.
7 Press the [Yes] key.
A screen appears, allowing you to specify the password.
8 Using the 10-Key Pad, enter the
password.
❍ Enter the password (20 digits
or less) if a password has been
set at the relay station.
❍ If you wish to correct the password, press the [No/C] key, and then enter the
new number.
9
Press the [Start] key to begin scanning and sending the fax.