Polling transmission, To set up polling transmission – Konica Minolta bizhub 161f User Manual
Page 135
6
6.1 Transmission Methods
6-16
bizhub 161f
F
a
x
T
rans
mi
ss
io
n/Re
ce
pti
on M
e
th
ods
Ch
apt
er
6
Polling Transmission
Documents scanned and saved in the memory can be retrieved by the recipient.
✎
Note
Polling transmission is compatible with F code transmission.
A maximum of 30 polling transmissions can be programmed.
If the memory is full, polling transmission cannot be set.
With polling transmission, the recipient incurs the cost of the call.
To set up polling transmission
1
Position the document to be faxed.
2
If necessary, change the “Resolution” setting (p. 5-11).
3
Press the [Function] key.
4
Press the [5] key from the 10-Key
Pad.
or
Press the [Function] key 5 times to
select “POLLING TX”, and then
press the [Yes] key.
5
Using the [ ] and [
Ö
] keys, select
either “SINGLE” or “MULTI”, and
then press the [Yes] key.
❍
To allow only one polling
transmission request, then
delete the document from the memory, select “SINGLE”.
❍
To allow multiple polling transmission requests, select “MULTI”. The
document is stored in the memory until it has been deleted.
Ц