Konica Minolta bizhub 161f - Manual (Page 182)

7.7 Setting Up the Fax Registration 7
bizhub 161f 7-35
Us
in
g th
e Uti
lit
y
Mod
e
Chap
ter
7
Setting Up One-Touch Dialing (“ONE-TOUCH DIAL” function)
If the one-touch dial keys are programmed with fax numbers, the recipient can be
specified easily and accurately without the need to manually enter the number
using the 10-Key Pad.
A maximum of 15 numbers can be programmed.
To program a one-touch dial key
1 Select the “FAX REGISTRATION”.
❍ Refer to “Selecting the “FAX REGISTRATION” menu” on page 7-34 .
2 Press the [1] key from the 10-Key
Pad to select “ONE-TOUCH
DIAL”.
3 Press the one-touch dial key that
you wish to program.
4 Enter the name of the
programmed number.
❍ For details on entering text,
refer to
“Entering Text” on
page 3-20 .
❍ Text up to 20 characters long can be entered for the name.
5 Press the [Yes] key.
6 Using the 10-Key Pad, enter the
fax number of the recipient.
❍ The fax number can contain a
maximum of 30 digits.
For details on the characters that can be entered. Refer to
“To fax by
entering the fax number directly using the 10-Key Pad” on page 5-2 .
❍ To enter a SUB, continue with step 7.
❍ If a SUB will not be entered, press the [Yes] key after entering the fax
number, and then skip to step 10.
❍ If you wish to change the fax number, press the [No/C] key, and then enter
the correct number.
❍ For details on F codes (SUB and SID), refer to “Using F codes” on
page 6-25 .