Minolta FAX2900 Instruction Manuals and User Guides
We have 2 Instruction Manuals and User Guides for FAX2900 Minolta
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 342 |
| Size: | 4.43 MB |
Show table of contents
Document Outline
- FAX2900/3900 User's Guide
- TOC
- 1. Introduction
- 2. Precautions
- 3. Before Making Copies or Faxing
- 4. Making Copies
- 5. Faxing
- 6. Fax Transmission/Reception Methods
- 7. Using the Utility Mode
- 7.1 Utility Mode
- 7.2 Specifying the Machine Settings
- 7.3 Setting Up the Paper Sources
- 7.4 Specifying Administrative Settings (“ADMIN. MANAGEMENT” menu)
- 7.5 Specifying Copy Settings
- 7.6 Setting Up the Fax Registration
- 7.7 Setting Up the Transmission
- 7.8 Setting Up the Reception
- 7.9 Setting Up the Communication
- 7.10 Setting Up the Report Output
- 7.11 Specifying Initial User Data
- 8. When a Message Appears
- 8.1 When the Message “PAPER EMPTY” Appears
- 8.2 When the Message “TONER EMPTY” Appears
- 8.3 When the Message “PAPER MISFEED” Appears
- 8.4 When the Message “PAPER JAM” Appears
- 8.5 When the Message “ORIGINAL DOC. JAM” Appears
- 8.6 When the Message “PAPER SIZE ERROR” Appears
- 8.7 When the Message “MACHINE TROUBLE” Appears
- 8.8 What Does Each Message Mean?
- 8.9 When Incorrect Copies Are Produced
- 8.10 The machine is not functioning as designed
- 8.11 When Faxing Is Not Performed Correctly
- 9. Internet Fax & Network Scan
- 9.1 Overview
- 9.2 Getting Ready
- 9.3 Using Scan to E-mail Operations
- 9.4 Using Scan to Server (FTP) Operations
- 9.5 Using Internet Faxing Operations
- 9.5.1 Procedure for Sending Internet Faxes
- 9.5.2 Specifying the Destination Using Programmed Dialing
- 9.5.3 Sending a Document to Multiple Destinations (Broadcast Transmission)
- 9.5.4 Sending a Document at a Specified Time (Timer Transmission)
- 9.5.5 Canceling (Deleting) a Document Queued for Timer Transmission
- 9.5.6 Receiving Internet Faxes
- 9.5.7 Forwarding Fax Documents
- 9.6 Checking the Transmission/Reception Results
- 10. Miscellaneous
| Recognized languages: | English |
|---|---|
| Pages: | 284 |
| Size: | 4.84 MB |
Show table of contents
Document Outline
- Contents
- Ch.1 Introduction
- 1.1 Safety Information
- 1.2 Regulation Notices
- CE Marking (Declaration of Conformity)
- For U.S.A. Users FCC Part 15-Radio Frequency Devices
- For Canada Users Interference-Causing Equipment Standard (ICES-003 Issue 3)
- For users in countries subject to Class B regulations
- For users in countries not subject to Class B regulations
- 47 CFR - Telecommunication Devices
- Warning For Setting Of Header And Footer
- IC CS-03-Telecommunication Devices
- For New Zealand Users:
- Laser Safety
- Internal Laser Radiation
- CDRH Regulation
- For European Users
- For Denmark Users
- For Finland, Sweden Users
- For Norway Users
- Laser Safety Label
- Ozone Release
- Acoustic Noise
- 1.3 Energy Star®
- 1.4 Trademarks and Registered Trademarks
- 1.5 Explanation of Manual Conventions
- 1.6 Explanation of Basic Concepts and Symbols
- Ch.2 Precaution
- Ch.3 Before Making Copies or Faxing
- 3.1 Available Features
- 3.2 Components and Their Functions
- 3.3 Parts Names and Their Functions
- 3.4 Control Panel
- 3.5 Turning the Machine On/Off and the Initial Mode
- 3.6 Useful Functions
- 3.7 Entering Text
- 3.8 Copy Paper
- 3.9 Loading Originals
- Two Ways of Loading the Original
- Specific Types of Originals
- Loading Originals in the Automatic Document Feeder
- Precautions for Loading Paper Into the Automatic Document Feeder
- Loading Originals into the Automatic Document Feeder
- Placing the Original on the Original Glass
- Precautions for Placing the Original on the Original Glass
- Positioning a Sheet Original
- Positioning Highly Transparent Originals
- Positioning Books
- 3.10 Checking the Machine Status
- 3.11 Print Area
- Ch.4 Making Copies
- Ch.5 Faxing
- Ch.6 Fax Transmission/Reception Methods
- 6.1 Transmission Methods
- Memory Transmission
- To specify Memory TX
- Direct Transmission
- Manual Transmission
- To send a fax manually
- Batch Transmission
- To fax using batch transmission
- Broadcast Transmission
- To fax using broadcast transmission
- Timer Transmission
- To fax using timer transmission
- Mailbox Transmission
- To fax using mailbox transmission
- Relay Initiation Transmission
- To fax using relay initiation transmission
- Polling Transmission
- To set up polling transmission
- To delete a document from the polling transmission setup
- Canceling (Deleting) a Document Queued in the Memory for Transmission
- To cancel a queued document
- 6.2 Reception Methods
- 6.3 Using F codes
- 6.1 Transmission Methods
- Ch.7 Using the Utility Mode
- 7.1 Utility Mode
- 7.2 Specifying the Machine Settings
- Selecting the “MACHINE SETTING” menu
- Specifying the Setting for “AUTO PANEL RESET”
- Specifying the Setting for “ENERGY SAVE MODE”
- Specifying the Setting for “DENSITY (ADF)”
- Specifying the Setting for “DENSITY (BOOK)”
- Specifying the Setting for “PRINT DENSITY”
- Specifying the Setting for “LCD CONTRAST”
- Specifying the Setting for “LANGUAGE”
- Specifying the Setting for “LAMP OFF TIME”
- Specifying the Setting for “BUZZER VOLUME”
- Specifying the Setting for “INITIAL MODE”
- 7.3 Setting Up the Paper Sources
- 7.4 Specifying User Management Settings (“USER MANAGEMENT” menu)
- 7.5 Specifying Administrative Settings (“ADMIN. MANAGEMENT” menu)
- 7.6 Specifying Copy Settings
- 7.7 Setting Up the Fax Registration
- Selecting the “FAX REGISTRATION” menu
- Setting Up One-Touch Dialing (“ONE-TOUCH DIAL” function)
- To program a one-touch dial key
- To change/delete a programmed one-touch dial key
- Specifying the Setting for “SPEED DIAL”
- To program a speed dial number
- To change/delete a programmed speed dial number
- Specifying the Setting for “GROUP DIAL”
- To program a group of fax numbers
- To change/delete a programmed group of fax numbers
- Specifying the Setting for “PROGRAM DIAL”
- To set program dialing
- To change/delete a programmed broadcast transmission
- To change/delete a programmed timer transmission
- To change/delete a programmed mailbox transmission
- To change/delete a programmed polling reception
- To change/delete a programmed relay initiation transmission
- Specifying the Setting for “BATCH TX”
- To set batch transmitting
- To change the batch transmission setting
- To delete the batch transmission setting
- Specifying the Setting for “MAILBOX”
- To register a mailbox
- To delete a mailbox
- 7.8 Setting Up the Transmission
- 7.9 Setting Up the Reception
- Selecting the “RX OPERATION” menu
- Specifying the Setting for “MEMORY RX MODE”
- To cancel memory reception
- Specifying the Setting for “NO.of RINGS”
- Specifying the Setting for “REDUCTION RX”
- Specifying the Setting for “RX PRINT”
- Specifying the Setting for “RX MODE”
- Specifying the Setting for “FORWARD”
- Specifying the Setting for “FOOTER”
- Specifying the Setting for “SELECT TRAY”
- Specifying the Setting for “CLOSED NETWORK”
- 7.10 Settings Up the Communication
- 7.11 Setting Up the Report Output
- 7.12 Specifying Initial User Data
- Ch.8 When a Message Appears
- 8.1 When the Message “PAPER EMPTY” Appears
- 8.2 When the Message “TONER EMPTY” Appears
- 8.3 When the Message “D/C LIFE” Appears
- 8.4 When the Message “PAPER MISFEED” Appears
- 8.5 When the Message “PAPER JAM” Appears
- 8.6 When the Message “ORIGINAL DOC. JAM” Appears
- 8.7 When the Message “PAPER SIZE ERROR” Appears
- 8.8 When the Message “MACHINE TROUBLE” Appears
- 8.9 What Does Each Message Mean?
- 8.10 When Incorrect Copies Are Produced
- 8.11 The machine is not functioning as designed
- 8.12 When Faxing Is Not Performed Correctly
- Ch.9 Miscellaneous
- Ch.10 Index