Konica Minolta bizhub 161f - Manual (Page 127)

6 6.1 Transmission Methods
6-8 bizhub 161f
F
a
x
T
rans
mi
ss
io
n/Re
ce
pti
on M
e
th
ods
Ch
apt
er
6
5 Specify the fax number of the recipient.
Repeat the appropriate operations described below until all recipients have
been specified.
❍ When using the one-touch dial
keys:
Press the one-touch dial key
programmed with the desired
fax number.
Press the [Yes] key, and then
specify the next recipient.
❍ When using the speed dial
numbers:
Press the [Speed Dial] key,
and then use the 10-Key Pad
to enter the 3-digit speed dial
number programmed with the
desired fax number.
Press the [Yes] key, and then
specify the next recipient.
❍ When using group dialing:
Press the one-touch dial key programmed with the desired group of fax
numbers.
Press the [Yes] key, and then specify the next recipient.
❍ When selecting from the phone book:
Press the [Phone Book] key, and then select either “LIST” or “SEARCH” to
select the desired fax number. (Refer to
“To fax using the phone book” on
page 5-8 .)
Press the [Yes] key, and then specify the next recipient.
❍ When entering the number
using the 10-Key Pad:
Enter the fax number of the
recipient.
Press the [
▼
] key. F codes
(SUB and SID) can also be
entered.
Press the [Yes] key, and then specify the next recipient.
? Has the wrong fax number been specified?
➜ Press the [No/C] key to delete the current selection. (This is valid only before
the recipient is set by pressing the [Yes] key.)
6 Press the [Start] key.
A message appears, allowing you to select whether or not to check the
recipients.