Konica Minolta bizhub 161f - Manual (Page 107)

5 5.1 Dialing
5-4 bizhub 161f
Fa
x
in
g
Cha
p
ter 5
To fax using speed dialing
If speed dial numbers have already been programmed, the fax number of a
recipient can be specified quickly by entering the corresponding speed dial number.
For details on programming speed dial numbers, refer to “Specifying the Setting for
“SPEED DIAL”” on page 7-39 .
1 Press the [Fax] key to enter Fax mode.
2 Load the document into the Automatic Document Feeder.
3 If necessary, change the “Resolution” setting (p. 5-11).
4 Press the [Speed Dial] key, and
then use the 10-Key Pad to enter
the 3-digit speed dial number.
? Has the wrong speed dial
number been entered?
➜ Press the [No/C] key, and then
enter the correct number.
5 Press the [Start] key to begin scanning and sending the fax.