Konica Minolta bizhub 161f - Manual (Page 170)

7.5 Specifying Administrative Settings (“ADMIN. MANAGEMENT” menu) 7
bizhub 161f 7-23
Us
in
g th
e Uti
lit
y
Mod
e
Chap
ter
7
To select the “ADMIN. MANAGEMENT” menu
1 Press the [Utility] key four times.
“ADMIN. MANAGEMENT”
appears.
2 Press the [Yes] key.
3 From the 10-Key Pad, press the key ([1]) for the “ADMIN. MANAGEMENT”
function that you wish to set.
❍ The “ADMIN. MANAGEMENT” functions are as follows:
1 REMOTE MONITOR
4 Using the 10-Key Pad, enter the 6-
digit administrator access number,
and then press the [Yes] key.
✎
Tip
If, at any time, you wish to quit setting an “ADMIN. MANAGEMENT” function,
press the [No/C] key. When the message “STOP SETTING?” appears, press
the [Yes] key to quit.