Konica Minolta bizhub 161f User Manual
Page 55
3
3.4 Control Panel
3-12
bizhub 161f
B
e
for
e
M
a
k
in
g
Cop
ies
or
F
a
x
ing
Chap
ter
3
8
[Scan] key
Press to enter Scan mode. The indicator lights up in green to indicate
that the machine is in Scan mode.
(Available only when the Scanner Unit SU-502 is installed.)
9
[Fax] key
Press to enter Fax mode. The indicator lights up in green to indicate that
the machine is in Fax mode.
10
[Copy] key
Press to enter Copy mode. The indicator lights up in green to indicate
that the machine is in Copy mode.
11
[Stop] key
• Press to stop a print cycle.
• Press to stop a scanning sequence.
• Stops the fax transmission or reception.
• The indicator flashes in orange when the machine is paused or while
printing.
12
[Panel Reset] key
Press to reset all print functions and settings to their defaults.
13
[123/ABC] key
Press to switch the 10-Key Pad between typing in numbers and typing
in letters.
14
[Start] key
• Press to start a scanning or print cycle.
• Starts a fax transmission.
• Press to specify the various settings.
• The indicator lights up in green when the machine can accept print
jobs.
15
[
▲
] [
▼
] key
• Press to change the zoom ratio in the range between
×
0.25 and
×
4.00 in
×
0.01 increments.
• Press to scan through the various settings and information, in order.
• Press to specify the various settings.
16
[Zoom] key
Press to select a zoom ratio from among those fixed ratios available as
standard.
17
[Paper] key
Press to select the paper tray that contains the desired paper.
18
[ ] [
Ö
] key
• Press to adjust the image density.
• Press to specify the various settings.
19
[Auto/Photo] key
Press to change the image density mode.
20
[Sort] key
Press to select the sort function.
21
[2in1] key
Press to select the 2in1 function.
22
[Status] key
Press to view the counters and transmission results. In addition, the list
of settings specified for each function and the reports can be printed.
(p. 3-37)
23
Memory TX lamp
Lights up when the memory transmission function is selected.
24
Auto RX lamp
Lights up when the automatic reception function is selected.
25
[Resolution] key
Used to select the image quality (transmission resolution).
26
[Speaker] key
Press to answer the call. Press again to hang up.
27
[Phone Book] key
Used to display the information programmed for one-touch dialing,
group dialing and speed dialing.
28
[Redial/Pause] key
• Redials the last number called.
• While dialing, used to generate a pause when transferring from an
internal to an external line or receiving information services.
No.
Part Name
Description
Ц