Konica Minolta bizhub 161f - Manual (Page 122)

6.1 Transmission Methods 6
bizhub 161f 6-3
F
a
x
T
rans
mi
ss
io
n/Re
ce
pti
on M
e
th
ods
Ch
apt
er
6
5 Using the 10-Key Pad, enter the
fax number of the recipient.
❍ The fax number of a previously
programmed recipient can also
be specified. Refer to
“Dialing”
on page 5-2 .
6 Press the [Start] key to begin scanning and sending the fax.
❍ To stop the transmission, press the [Stop] key.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed (p. 7-77).
Direct Transmission
If the Memory TX lamp is not lit, the direct transmission is selected. One page of the
document at a time can be scanned, according to the transmission status. This
ensures that even documents with many pages can be sent.
✎
Note
When faxing using direct transmission, the document should be loaded into the
Automatic Document Feeder. Transmission is not possible by positioning the
document on the Original Glass.
If direct transmission is specified while a fax is being sent or received, the
transmission will be queued.
With direct transmission, multiple recipients cannot be specified.
Direct transmission and timer transmission cannot be performed at the same
time.