To change/delete a programmed one-touch dial key – Konica Minolta bizhub 161f User Manual
Page 184
7.7 Setting Up the Fax Registration
7
bizhub 161f
7-37
Us
in
g th
e Uti
lit
y
Mod
e
Chap
ter
7
To change/delete a programmed one-touch dial key
1
Select the “FAX REGISTRATION”.
❍
Refer to
“Selecting the “FAX REGISTRATION” menu” on page 7-34
.
2
Press the [1] key from the 10-Key
Pad to select “ONE-TOUCH
DIAL”.
3
Press the one-touch dial key that
you wish to change or delete.
4
Press the [No/C] key.
❍
If a one-touch dial key
programmed with a group of
fax numbers or a transmission/
reception function is pressed,
the message shown at the
right appears. To delete the
programmed settings, press
the [No/C] key. The “FAX
REGISTRATION” menu
appears again.
❍
To change the group dialing or
program dialing settings, refer to page 7-43 and page 7-46.
5
Using the [ ] and [
Ö
] keys, select
either “EDIT” or “DELETE”, and
then press the [Yes] key.
❍
If “EDIT” was selected, the
name is displayed. (Continue
with step 6.)
❍
If “DELETE” was selected, the settings programmed for the one-touch dial
key are deleted and the “SELECT REGIST.KEY” screen appears again.
❍
If you try to change the settings for a one-touch dial number used in group
dialing or program dialing, a confirmation message appears, asking whether
or not to change the corresponding settings programmed in group dialing or
program dialing.
If the [Yes] key is pressed, the corresponding settings programmed in group
dialing or program dialing are changed.
Ц