WIKA Pascal ET - Manual (Page 35)

6 Commissioning, operation
WIKA Operating Instruction, Model Pascal ET and Pascal ET/IS 35
GB
6.3.2 Other assignments
6.3.2.1 Pressure measurement
The following procedure illustrates the setting of Pascal ET or Pascal ET/IS for pressure
measurement. The particular channel is selected by pressing one of the four big displays and then
pressing CHANNEL and ASSIGN from the menu, as shown below:
Figure 22 – Channel assign selection
Automatically the program shows the following screen and it remains in this position until the
operator points out what type of parameter he desires to associate to a selected channel, for
example to the Channel 1. In this case press P for pressure.
Figure 23 – Pressure parameter selection
The Pascal ET or Pascal ET/IS can be equipped with up to two pressure modules and each of
them can handle up to three pressure sensors, two internals and one external with standard
accuracy.