WIKA Pascal ET - Manual (Page 27)

6 Commissioning, operation
WIKA Operating Instruction, Model Pascal ET and Pascal ET/IS 27
GB
6.2.6 Thermoresistance simulation
Through the output module (OUT) it is possible to simulate thermoresistance. This function can be
used to check and calibrate: temperature transmitters
– analogue or digital indicators.
The instrument can simulate thermoresistance types indicated in the following table:
Type Range/°C Resolution/°C
Max
Pt100 (385) - 200…850 0,1
- 200…850 0,01
Pt100 (3916) - 200…850 0,1
- 200…850 0,01
Pt100 (3926) - 200…850 0,1
- 200…850 0,01
Pt100 (3902) - 200…650 0,1
- 200…650 0,01
Pt100 (3923) - 200…600 0,1
- 200…600 0,01
Pt100 JIS (3916) - 200…600 0,1
- 200…600 0,01
Pt200 (385) - 200…850 0,1
- 200…850 0,01
Pt500 (385) - 200…850 0,1
- 200…530 0,01
Pt1000 (385) - 200…850 0,1
- 200…850 0,01
Pt1000 (3916) - 200…850 0,1
- 200…850 0,01
Ni100 (617) - 60…180 0,1
- 60…180 0,01
Ni120 (672) 0…150 0,1
0…150 0,01
Cu10 (42) - 70…150 0,1
- 70…150 0,01
Cu100 - 180…150 0,1
- 180…150 0,01
Table 6 – Thermoresistance simulation table
Fast programming of the value to be simulated
In generation or simulation on any particular channel the simulated value can be
rapidly changed by pressing immediately to the right of the simulated value where
there is a sensitive square that pressed allows user to enter the value to simulate by a
numerical keyboard.