WIKA Pascal ET - Manual (Page 17)

6 Commissioning, operation
WIKA Operating Instruction, Model Pascal ET and Pascal ET/IS 17
GB
6 Commissioning, operation
6.1 Commissioning
6.1.1 Instrument Overview
1
Connector RS-232
2 Connector for battery charger
3 Power ON
4 Power OFF
5 Back light OFF (Lamp)
6 Connectors for external P transducer
7
Contrast +/-
8 Environmental Parameter Connector
9 Loop power supply – 24 V d.c.
10 IN electrical/temperature modules
11 OUT electrical/temperature modules
6.1.2 Functional modules
The functional modules can be classified according to their assignments:

■ Electrical and temperature signals measurement
■ Pressure measurement, (2 different modules, up to 4 internal pressure sensors and 2
connectors for external pressure sensor)
■ Electrical and temperature signals generation/simulation
■ Pressure generation and regulation
■
Environmental parameters measurement
Many different configurations are available according to the specific requirements of the user.
3
4
5
6
7
8
10
1
2
9
11