Kramer Electronics VP-81KSi - Manual (Page 43)

Kramer Protocol
39
Operation commands
Command Syntax Response
Lock front panel LOCK-FP LOCK-MODE
Short form: LCK LOCK-MODE LOCK-FP LOCK-MODE RESULT
Get front panel locking state LOCK-FP? LOCK-FP LOCK-MODE
Parameters Description:
LOCK-MODE = Front panel locking state:
"0" or "off" to unlock front panel buttons.
"1" or "on" to lock front panel buttons.
Restart device
RESET RESET OK
Switch to protocol 2000* P2000 P2000 OK
* Protocol 2000 has command to switch back to ASCII protocol (like protocol 3000)
Audio parameters commands
Command Syntax Response
Set audio level in specific
amplifier stage.
AUD-LVL STAGE, CHANNEL, VOLUME
Short form: ADL STAGE, CHANNEL, VOLUME AUD-LVL STAGE, CHANNEL,
VOLUME RESULT
Read audio volume level AUD-LVL? STAGE, CHANNEL
Short form: ADL? STAGE
AUD-LVL STAGE, CHANNEL,
VOLUME
Mute audio MUTE MUTE-MODE MUTE MUTE-MODE RESULT
Parameters Description:
STAGE =
"In","Out"
or
Numeric value (present audio processing stage). For example: "0" for Input level, "1" for Pre-Amplifier, "2" for Amplifier (Out)
etc.
CHANNEL = Input or Output #
VOLUME = Audio parameter in Kramer units, precede minus sign for negative values.
++ increase current value
-- decrease current value
MUTE MODE = 1 – Mute
0 – Unmute
Machine info commands
Command Syntax Response
* Time settings commands require admin authorization
Read in/outs count INFO-IO? INFO-IO: IN INPUTS_COUNT, OUT OUTPUTS_COUNT
Read max presets
count
INFO-PRST? INFO-PRST: VID PRESET_VIDEO_COUNT, AUD
PRESET_AUDIO_COUNT