Kramer Electronics VP-81KSi - Manual (Page 33)

Technical Specifications
29
12 Technical Specifications
Table 6 lists the technical specifications 1
Table 6: Technical Specifications of the VP-81KSi
of the VP-81KSi.
INPUTS: 8 XGA on 15-pin HD (F) connectors
8 Unbalanced stereo audio on 3.5mm mini jacks
OUTPUTS: 1 XGA on 15-pin HD connector
1 TP on RJ-45 connector
1 unbalanced stereo audio on a 3.5mm mini jack
1 balanced audio stereo on a 5-pin detachable terminal block
MAX. OUTPUT LEVEL: VIDEO: 2Vpp AUDIO: Stereo Unbalanced 7.8Vpp
Stereo Balanced 15.6Vpp differential (17dBu)
BANDWIDTH (-3dB): VIDEO: Out 440MHz
CAT 5 (Rec Out) 150MHz
AUDIO: Stereo Unbalanced 20kHz
Stereo Balanced 20kHz
RESOLUTION: VIDEO: VGA up to WUXGA
DIFF. GAIN: VIDEO: XGA 0.04%
DIFF. PHASE: VIDEO: UXGA: 0.07Deg
K FACTOR: VIDEO: UXGA 0.2%
S/N RATIO: VIDEO: UXGA 68.3dB to 5MHz AUDIO: Stereo Unbalanced 74dB @1kHz
Stereo Balanced 74.4dB @1kHz
CAT5 (Rec Out) 69.8dB
CROSSTALK (all hostile): VIDEO: UXGA –52dB to 5MHz AUDIO: Local Stereo Unbalanced –73dB @1kHz
Local Stereo Balanced <72dB @1kHz
VOLUME CONTROL: AUDIO: Stereo Unbalanced -65.4 to 25.8dB
Stereo Balanced -59.4 to 31.8dB
COUPLING: VIDEO: UXGA—DC
TP Out—DC
AUDIO: Stereo Unbalanced—In AC, Out DC
Stereo Balanced—In AC, Out DC
AUDIO THD + NOISE: Stereo Unbalanced 0.08%
Stereo Balanced 0.08%
AUDIO 2nd HARMONIC: Stereo Unbalanced 0.001%
Stereo Balanced 0.001%
POWER SOURCE: 100-240V AC 50/60Hz 29VA
DIMENSIONS: 43.6cm x 19.1cm x 4.4cm (19” x 7.5” x 1U) W, D, H rack-mountable
WEIGHT: 1.7kg (3.8lbs) approx.
ACCESSORIES: Power cord, Windows ® -based Kramer control software, RC-IR3 Infrared Remote Control
transmitter, one SI-1VGA Remote Step-in module
OPTIONS: External remote IR receiver cable 2 ; 15m extension cable 3 , SI-1VGA Remote Step-in
Module
1 Specifications are subject to change without notice
2 P/N: C-A35M/IRR-50
3 P/N: C-A35M/A35F-50