Festo Пассивные нправляющиеFDG-ZR-RF - Manual (Page 25)

FDG−...−ZR−RF
Festo FDG−...−ZR−RF 0404NH English
25
11 Eliminating faults
Fault Cause Remedy
Loud running noises and
sluggish slide Insufficient lubrication of
the slide bearing Lubricate, if necessary
return to Festo
Red−brown colouring on
the guide rods Rust due to insufficient
lubrication
Noticeable play on the
slide Wear, damage Return product to Festo
Sluggishness of a twin
arrangement near the end
position Insufficient parallelism
between drive and
FDG−...−ZR−RF Readjust axes
Engaging" at a position long downtime Disappears after a new
start−up phase
Vibration Axis overloaded Observe maximum loading
values
Dynamics too high Check modifications to
project planning
Incorrect arrangement of
the centre of gravity of the
work load Shift centre of gravity
External interference on
base stand or in multi−axis
system Eliminate interference
Missing or undefined
switching functions Proximity switch or cable
defective Replace defective part
Sensor support or
switching lug incorrectly
fitted Correct fitting
Switching gap set
incorrectly Readjust
Switch or connection
incorrect Replace incorrect part