Festo Пассивные нправляющиеFDG-ZR-RF - Manual (Page 22)

FDG−...−ZR−RF
Festo FDG−...−ZR−RF 0404NH English
22
7 Commissioning and operation
Warning
S Make sure that:
ć nobody can place his/her hand in the
path of the moving load (e.g. by
providing a protective screen)
ć there are no objects within the
positioning path of the axis.
It must not be possible to touch the
FDG−...−ZR−RF until the mass has come to
a complete stand.
Please note
The slots in the cover caps enable objects (e.g. nuts or screws), which have
fallen unintentionally into the groove, to be extracted.
Warning
Objects ejected from the cover caps can
cause injury to human beings or damage
to property.
S Make sure that nobody can be hit by
these objects if he/she is in their path
(e.g.Ăby providing a protective screen).
S Apply current to the drive motor at first at
low speed and with low torques.
The slide will then move slowly over the
complete positioning path.
Fig. 11
Fig. 12
Fig. 13
0
1000
3000
2000
U
min