Goulds Pumps 3393 - IOM - Manual (Page 40)

Commissioning, Startup, Operation, and Shutdown
b) Place the coupling guard half over the pump-side end plate.
1. Annular groove
2. Pump-side end plate
3. Driver
4. Pump half of the coupling guard
The annular groove in the coupling guard half must fit around the end plate.
1. Annular groove
2. End plate (pump end)
3. Guard half
3. Use a bolt, a nut, and two washers to secure the coupling guard half to the end plate.
Tighten securely.
38 Model 3393 Installation, Operation, and Maintenance Manual