Goulds Pumps 3393 - IOM - Manual (Page 17)

Product Description
RS - Radial Suction configuration features radial
suction and discharge nozzles. The suction and
discharge nozzles can be positioned either vertically
or horizontally at 90
O to either side. This design
consists of two robust, finned bearing housings with
traditional anti-friction bearings and mechanical
seals on each end of the pump.
ES - End Suction configuration features an end
suction nozzle in conjunction with a radial discharge
nozzle. The suction end of the pump utilizes a
product-lubricated bearing eliminating the need for
a second bearing housing and mechanical seal.
Because of the positioning of the sleeve bearing in
the end suction casing, the suction flange size is
one size larger than the size for the radial suction
arrangement. The discharge nozzle can be posi-
tioned either vertically or horizontally at 90
O to either
side.
General description i-ALERT™ Condition Monitor
Description
The i-ALERT Condition Monitor is a compact, battery-operated monitoring device that
continuously measures the vibration and temperature of the pump power end. The condition
monitor uses blinking red LEDs to alert the pump operator when the pump exceeds pre-set
vibration and temperature limits. This allows the pump operator to make changes to the
process or the pump before a catastrophic failure occurs. The condition monitor is also
equipped with a single green LED to indicate when it is operational and has sufficient battery
life.
Software License Agreement
BY USING THE i-Alert™ CONDITION MONITOR, YOU AGREE TO BE BOUND BY THE
TERMS AND CONDITIONS OF THE FOLLOWING LICENSE AGREEMENT. PLEASE READ
THIS AGREEMENT CAREFULLY.
ITT Corporation and its subsidiaries, affiliates, either directly, or through its authorized
sublicensees ("ITT") grants you a limited, non-exclusive license to use the software embedded
in this device ("Software") in binary executable form in the normal operation of the i-Alert™
condition monitor for monitoring the condition of an Goulds Pump Inc. model. Title, ownership
rights, and intellectual property rights in and to the Software remain in ITT or its third-party
providers. You agree that this license agreement does not need to be signed for it to take
effect.
You acknowledge that this Software is the property of ITT and is protected under United States
of America copyright laws and international copyright treaties. You further acknowledge that
the structure, organization, and code of the Software are valuable trade secrets of ITT and/or
its third-party providers and that the Software in source code form remains a valuable trade
secret of ITT. You agree not to decompile, disassemble, modify, reverse assemble, reverse
engineer, or reduce to human readable form the Software or any part thereof or create any
derivative works based on the Software. You agree not to export or re-export the Software to
any country in violation of the export control laws of the United States of America.
Model 3393 Installation, Operation, and Maintenance Manual 15