Goulds Pumps 3196 i-FRAME - IOM - Manual (Page 111)

Maintenance
f) Attach the bearing-frame foot (241) and fasten the bolts (370F) by hand.
Assemble the frame
1. Support the frame assembly in a horizontal position.
2. Check the shaft-end play by moving the shaft forward and backward by hand, and note any
indicator movement.
If the total indicator reading is greater than the values in this table, then disassemble the
shaft and determine the cause.
Table 15: Shaft-end play
Use this table as a reference for shaft-end play values.
Frame Double row bearing Duplex bearing
0.0011 (0.028) 0.0007 (0.018)
STi inches (millimeters) 0.0019 (0.048) 0.0010 (0.025)
0.0013 (0.033) 0.0009 (0.023)
MTi inches (millimeters) 0.0021 (0.053) 0.0012 (0.030)
Not applicable 0.0010 (0.025)
LTi inches (millimeters) 0.0015 (0.038)
0.0014 (0.036) 0.0010 (0.025)
XLT-i inches (millimeters) 0.0023 (0.058) 0.0015 (0.038)
Model 3196 i-FRAME Installation, Operation, and Maintenance Manual 109