Myron L D-6 - Manual (Page 34)

3. Press repeatedly until
you pass the “CELL ch” location.
The display will show “Auto
oFF” (see Figure 23).
4. Press to initiate. “CAL”
will be displayed along with
“15 SEC” (see Figure 24).
5. Press or to
change the time (see Figure
25). Maximum time is shown.
6. Press to accept the
change (new time).
XVIII. “PC On” Mode
“PC On” mode enables data transfer to
a personal computer when the wireless
communication option is installed.
(See page 40, G.) If this option is not
installed, you can still put the unit in “PC
On” mode, but the unit cannot transfer
data. For complete data transfer
instructions, read the operation manual
included in the wireless communication
accessory package.
A. Enabling “PC On” Mode
1. Press any parameter button
to turn the instrument on.
2. Press and HOLD
key until the menu “PC
OFF” appears (see Figure 26).
5. Press key. “PC On” will
be displayed (see Figure 27).
NOTE: “PC Ini” may momentarily be
displayed while initializing (see Figure 28).
Figure 24
CAL
Figure 25
CAL
Figure 26
Figure 27
Figure 28
31