Ix. glossary – Myron L Aquaswitch II User Manual
Page 47
![background image](/manuals/460883/47/background.png)
IX. GLOSSARY
442™
An Internationally recognized “natural water”
standard developed by the Myron L Company in
1964.
Algorithm
A procedure for solving a mathematical
problem. See Addendum, Temperature
Compensation and TDS Derivation.
Anions
Negatively charged ions
DVM
Digital Volt Meter
H y s t e r e s i s
Dead Band — related to alarm set
point. The amount of delay or overlap
between change from high to low or low
to high.
LCD
Liquid Crystal Display
KCl
Potassium Chloride — used as a
standard for many applications.
Normally, micromhos or microsiemens
are the units of measure.
NaCl
Sodium Chloride — used as a
standard for sea water and other
applications.
N I S T
National Institute Standards & Testing
PLC
Programmable Logic Controller
PPM
Parts Per Million — common units of measure
for TDS.
PPT
Parts Per Thousand — common units of
measure for TDS.
SCADA
Supervisory Control And Data Acquisition
Tempco (TC)
Temperature Compensation — See Addendum,
Temperature Compensation.
TDS
Total Dissolved Solids or the Total Conductive
Ions in a solution — normally displayed as ppm
or ppt. See Addendum, Conductivity
Conversion to TDS.
Tweaker
A screwdriver specially designed for adjusting
electrical calibration controls.
µM or µS
Micromho or microsiemen — common unit of
measure for conductivity.
Meg or ohm
Megohm — common unit of measurement for
resistivity.
U S P 2 5
United States Pharmaceutical regulation,
revision number 25. In part, requires
Conductivity/TDS, resistivity or pH
measurements be taken, recorded and/or
systems controlled using equipment without
temperature compensation. Requires a
separate temperature measuring device
(temperature measurements may be part of
Cond/TDS, Resistivity or pH device but must
not correct measurements for temperature
errors).
44