Panasonic -eng - Manual (Page 14)

14
Preparation
Connect the video camera to a computer
Tip
For further details, also refer to the video camera manual.
WEB MODE-compatible video cameras may display the YouTube
Uploader window. (Close the window when not using this function.)
To record to optical discs or SD cards, use a disc drive or SD card
reader/writer. (Some video cameras support recording to the SD card
in the video camera.)
Do not operate the video camera or disconnect the USB cable
during the transfer of video camera data. The software may
malfunction, and data may be lost.
SD card connection
When using an SD card slot or reader/writer, connect the device
before starting this software. (For connection instructions, refer to
the Operating Instructions of the computer or SD card.)
If you connect the device after startup, select the drive on the
[SD] tab of the [Settings] window, and then click [OK].
(→82)
●
●
●
●
●
Disconnecting the video camera from the computer
1
Confirm that the video camera is not
recording or being accessed in some
way.
2
Double-click or in the task tray.
Example of the
task tray icon
3
Select [USB Mass Storage Device] and
click [Stop].
If multiple USB devices are displayed, you can double-click
each to check the video camera.
4
Disconnect the USB cable from the
computer.
5
Turn off the video camera.