Agilent Technologies N9340A - Manual (Page 26)

2 Getting Started
24 N9340A User’s Guide
Preparation for Use
Use
[SYS] hardkey to check or set the system
settings of your analyzer.
Setting up your N9340A
1 Press [SYS] > {Setting} > {General} to set time and
power saving mode
:
•
Press
{Time/Date} to set the time and date for
your analyzer.
•
Press
{Power Manager} to select a power saving
mode from the follow three modes: turning off
backlight, turning off screen display, and
turning off both backlight and screen display.
2 Press [SYS] > {Setting} > {Language} to select a
language displayed on screen.
3 A N9340A allows you to manually adjust the
display brightness and contrast.
• Press
[SYS] > {Brightness} and then rotate the
knob to adjust display brightness.
• Press
[SYS] > {Contrast} and then rotate the
knob to adjust display contrast.
4 Press [SYS] > {More(2 of 3)} > {Key Beep} to toggle
the buzzer beep function between on and off.
Testing key stroke and screen pixel
1 Press [SYS] > {More (2 of 3)} > {Diagnostics} > {Front
Panel} to test all the front panel keys except the
[PRESET] hardkey and power switch.
2 Press [SYS] > {More (2 of 3)} > {Diagnostics} > {Black
Pixel} or {White Pixel} to check the LCD pixel.