Calculate:marker subsection – Agilent Technologies N9340A User Manual

Page 107

Text mode
Original mode

SCPI Command Reference

N9340A User’s Guide

105

CALCulate:MARKer Subsection

Markers All Off on All Traces

:CALCulate:MARKer:AOFF

This command turns off all markers on all the
traces.

Markers All On

:CALCulate:MARKer:ALL

This command turns on all the markers and places
them on six highest peaks.

Frequency Counter Marker

:CALCulate:MARKer[1]|2|3|4|5|6:FCOunt
[:STATe] OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4|5|6:FCOunt
[:STATe]?

This command turns on or off the marker
frequency counter. To query the frequency counter,
use

:CALCulate:MARKer[1]|2|3|4|5|6:FRECount

:X? If the specified marker number is not on, it
will be turned on and becomes the active marker
(normal mode). Once the marker count is on, it is
on for any active marker, not just for the one used

Key Access:

[Marker] > {More} > {All Off}

*RST State:

Off

Key Access:

[Marker] > {Peak search} > {Auto search}