Sense]:frequency subsection – Agilent Technologies N9340A User Manual

Page 131

Text mode
Original mode

SCPI Command Reference

N9340A User’s Guide

129

Types of Dtection

This command specifies the detection mode. For
each trace interval (bucket), average detection
displays the average of all the samples within the
interval. The averaging can be done using two
methods:

• The power method (RMS)

• The video method (Y Axis Units)

The method is controlled by the TRACE, Detector.

[:SENSe]:FREQuency Subsection

Center Frequency

[:SENSe]:FREQuency:CENTer
[:SENSe]:FREQuency:CENTer UP|DOWN
[:SENSe]:FREQuency:CENTer?

This command sets the center frequency.

*RST Value:

1.5 GHz

Available unit:

Hz, kHz, MHz, GHz

Key Access:

[FREQ] > {Center Freq}