Working with batteries, Installing a battery, Viewing battery status – Agilent Technologies N9340A User Manual

Page 15: Installing a battery viewing battery status

N9340A Overview

N9340A User’s Guide

Working with Batteries

Use the original battery supplied with the
instrument.

Installing a Battery

Viewing Battery Status

Determine the battery status in either of the
following ways:

• Check the battery icon in the lower right corner

of the front panel screen which indicates the
approximate level of charge.

• Press

[SYS] > {More (1 of 3)} > {Show System} > {Page

down} to check the current battery information.

CAU-

CAUTION

Insert a battery with electrodes physically attached

properly.

Step

Notes

1 Open the battery cover Use a cross type screwdriver to loose

the screw, then pull the cover open.

2 Insert the battery
3 Close the battery cover Push the cover closed, then

ref-fasten the screw.