Agilent Technologies N9340A - Manual (Page 16)

1 N9340A Overview
14 N9340A User’s Guide
Charging a Battery
You can only charge the battery when it is in the
analyzer.
Fully charge the battery when for the
first use.
Internal Charging
Use your N9340A to recharge the battery while the
analyzer is operating or shut down.
1 Install the battery in the analyzer.
2 Simply attach the AC- DC adapter and switch on
external power.
3 The charging indicator lights, indicating that the
battery is charging. When the battery is fully
charged, the green charging indicator turns off.
During charging and discharging, the battery will
monitor and report its voltage, current, and
temperature. If any of these monitored conditions
exceed their safety limits, the battery will
terminate any further charge or discharge until the
error condition is corrected.
CAU- CAUTION
Never use a modified or damaged charger.
NOTE
For a fully depleted battery, the charging time is approximately
three hours if the analyzer shut down, longer time is needed if
the analyzer is operating.