Marker to trace, Marker x value – Agilent Technologies N9340A User Manual

Page 111

Text mode
Original mode

SCPI Command Reference

N9340A User’s Guide

109

Marker to Trace

:CALCulate:MARKer[1]|2|3|4|5|6:TRACe

:CALCulate:MARKer[1]|2|3|4|5|6:TRACe?

This command assigns the specified marker to the
designated trace 1, 2, 3 or 4.

Marker X Value

:CALCulate:MARKer[1]|2|3|4|5|6:X
:CALCulate:MARKer[1]|2|3|4|5|6:X?

This command positions the designated marker on
its assigned trace at the specified trace X value.
The value is in the X- axis units (which is often
frequency or time).

The query returns the current X value of the
designated marker.

*RST value:

Range:

1 to 4

Key Access:

[Marker] > {More} > {Marker Trace}

*RST State:

Matches the units of the trace
on which the marker is
positioned.

Key Access:

[Marker] > {Normal}