Agilent Technologies B2201A - Manual (Page 63)

Agilent B2200 User’s Guide, Edition 2 3-3
Front Panel Operation
Operation
Operation
This section describes operations of the Agilent B2200.
• “To Initialize Agilent B2200”
• “To Enable Light Pen”
• “To Change Channel Configuration Mode”
• “To Change Connection Rule”
• “To Change Connection Sequence”
• “To Control Switch Condition”
• “To Open All Switches”
• “To Save/Load Setup Data”
• “To Use Bias Mode”
• “To Use Ground Mode”
• “To Use Couple Mode”
• “To Display Firmware Revision”
• “To Display Module Information”
• “To Read Error Message”
• “To Set Beeper”
• “To Set GPIB Address”
• “To Set Remote Display Mode”
• “To Return to Local Mode”
NOTE About moving cursor, selecting value, and changing display
Use the right/left arrow key to move the cursor to the desired function name. Use the
up/down arrow key to select the value for the setup item.
The Enter key makes the setup effective, and returns the display to the previous
menu or display.
The Exit key returns the display to the previous menu or display without making the
setup effective.