Agilent Technologies B2201A - Manual (Page 36)

2-2 Agilent B2200 User’s Guide, Edition 2
Installation
This chapter describes requirements to install Agilent B2200 and the tasks for
installation, and is organized into the following three sections:
• “Requirements”
• “Inspection”
• “Installing the B2200”
• “Self-Test”
• “Output Connections”
• “Input Connections”
• “Measurement Cable Length”
• “Maintenance”
WARNING The maximum input voltage of the Agilent B2200 is ±200 V. And dangerous
voltages may be present at the output terminals. To prevent electric shock, you
must observe the following safety precautions when using the Agilent B2200.
• Use a three-conductor ac power cable to connect cabinet (if used) and the
Agilent B2200 to an electric ground (safety ground).
• If you need to touch the force and guard terminals of the output connector,
turn off the Agilent B2200 and discharge any capacitors whenever possible.
• Warn workers around the B2200 about dangerous conditions.